DRY TIME 5 minutes
NET WEIGHT: 11 OZ (312 g)
COVERAGE: Influenced by usage. Up to 16 sq ft – single coat.
APPLICATION CONDITIONS: Use in a room temperature (70 °F), low humidity and a well-ventilated area
RECOAT WINDOW: Some paints require its application to be within (so many) minutes or after (so many) hours. Design Master sprays can be reapplied at any time.
CLEANUP: Lacquer thinner or acetone
SPECS: Pigmented, solvent-based, lacquer type spray
WARNING: This product can expose you to chemicals including Toluene, which is known to the State of California to cause reproductive harm. For more information go to www.P65Warnings.ca.gov
SURFACES:
- Acrylic
- Ceramics
- Chipboard
- Concrete
- Dried Flowers
- Fabrics
- Foam Core Board
- Foliage and Plants
- Glass
- Metals
- Paper
- Papier Mache
- Plaster
- Pottery
- Ribbon
- Silk Flowers
- Some Plastic
- Stone
- Terra Cotta
- Wicker
- Wood
APPLICATION TIPS:
- Quick coverage with one coat. Allow coat to dry before applying more. Avoid thick build up without drying between coats.
- Do not apply clear coatings over the metallic color to avoid dulling the finish.
- On glass a basecoat of Clear Finish Gloss will improve adhesion.
- Some plastic surfaces will require Primer to ensure adhesion. Test spray to determine.
- On vinyl surfaces apply a basecoat of Super Surface Sealer to insure compatibility between the surface and spray color. Do not use on latex coated surfaces.
- Some prefinished surfaces can be difficult to determine coating type. Test spray an inconspicuous area to ensure compatibility and desired results.
- Clean spray valve immediately after use by turning can upside down and spraying 3-4 seconds.
